$86.34 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 255021780236
eBay Applicable Models: 2004-2010 Chevrolet Malibu 2005-2009 Pontiac G6 2007-2009 Saturn Aura Features: Direct replacement for a trouble-free installation. Steel,iron or aluminum construction ensures durability. Powder-coated or painted for long-lasting rust and corrosion resistance. Package Includes: Lower Ball Joints come Pre-Assembled onto the Control Arms 1 x Part # Front Left Lower Control Arm w/ Ball Joint Driver Side 1 x Part # Front Right Lower Control Arm w/ Ball Joint Passenger Side 2 x Part # Front Sway Bar Link(11.8inch Length) Fits 2007-2009 Saturn Aura Pair(4) Control Arm Sway Bar Link Suspension Part Applicable Models: 2004-2010 Chevrolet Malibu 2005-2009 Pontiac G6 2007-2009 Saturn Aura Features: Direct replacement for a trouble-free installation. Steel,iron or aluminum construction ensures durability. Powder-coated or painted for long-lasting rust and corrosion resistance. Package Includes: Lower Ball Joints come Pre-Assembled onto the Control Arms 1 x Part # Front Left Lower Control Arm w/ Ball Joint Driver Side 1 x Part # Front Right Lower Control Arm w/ Ball Joint Passenger Side 2 x Part # Front Sway Bar Link(11.8inch Length) Please check above compatibility list to make sure it fits your vehicle. Some of the parts we have grease fittings but other parts come factory sealed, this does not affect the performance or quality of the parts. Pictures may not contain the exact items that will be shipped, colors may be a little different, extra accessories & Parts may be added. Suspension Control Arm Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Control Arm Bushing Replacement Reference: Control arms themselves do not generally wear out, but the control arm bushings and ball joints do, so you will likely need to remove them to service those components. Yet, some OEMs or parts suppliers do not sell bushings and ball joints separately, so you may have to purchase the entire control arm and replace it as a unit. Also, control arms can become bent or damaged as the result of a collision or driving through a deep pothole, so control arms do need to be inspected for damage. Many control arms are now made from forged or sintered aluminum, so you may need to measure for damage or check it on an alignment machine. Picture(A) 1.Remove the coil spring and steering knuckle by following the steps in previous skill drills. 2.Loosen the bolts holding the upper control arm in place. Note that there might be shim packs held in by the bolts. If so, tape them together in their packs, and label their positions. Picture(B) 3.Remove the lower control arm by removing the bolts holding it in place. As you dismantle the system components, carry out a constant inspection of the parts being removed. Doing so will aid you when you need to order replacement parts. You should also mark mating parts with white paint to aid in reassembly. Picture(C) 4.Inspect the upper and lower control arm for wear or damage. If the control arm bushings show signs of excessive wear or deterioration of the bushing material, they will have to be replaced. 5.Replace the worn bushings in the upper and/or lower control arm. Replacement of control arm bushings can be performed two ways — with a hydraulic press with correctly sized press tools or with an air chisel. Be careful using an air chisel: Damage to the control arm can result, such as gouging the mounting surface of the bushing if you slip with the chisel. Picture(D) 6.Press method: Place the control arm in a hydraulic press supported so the bushing is level to the press head. Using the correct-sized adapter, press the bushing out. Picture(E) 7.Using the press, install the new bushing into the control arm. Be careful to start the bushing in straight, or you could bend the control arm. Press it in until the flange bottoms out. Picture(F) 8.Air chisel method: Install the control arm in a vise. Use an air chisel to work the bushing out. Be careful not to gouge the mating surface of the control arm. Picture(G) 9.Using the air hammer, drive the new bushing into place, making sure it is fully seated. Sway Bar The sway bar stabilizer bar is similar to the torsion bar or antiroll bar. It is used in light vehicles as a stabilizer, or antiroll bar, and connected to the chassis in the center, and each end is connected to one side of the suspension system. Sway bars are most common on the front suspension because it is most prone to sway, but are also installed on the rear suspension in some vehicles. When the vehicle is turning, centrifugal force acts on the body and tends to make it lean outward (roll). The sway bar uses its connections to each side of the suspension to resist this roll tendency. In this way, the spring on the inside corner can assist the spring on the outside corner to bear the additional load on the outside wheels. This tends to make the vehicle corner flatter. But because the sway bar can pivot in bushings on the frame, the sway bar just pivots when both wheels go over a speed bump. Also, stiffer roll bars can be installed in a vehicle to enhance its cornering ability. Sway Bar Stabilizer Link Removing Guideline: The sway bar stabilizer components help prevent body roll when cornering. Although the stabilizer bar itself rarely gives any trouble, the rubber bushings on the bar and links wear out. This usually results in increased body roll as well as a clunking noise in the suspension. The stabilizer components should be checked whenever a vehicle is brought into the shop because of handling concerns or suspension-related noises. Picture(A) 1.Safely raise the vehicle on a hoist, or use a jack and place safety stands under the frame. 2.Remove the nut holding the stabilizer bar link. Picture(B) 3.Remove the link by hand. Picture(C) 4.Visually inspect the rubber link grommets for cracks, softness, brittleness, or wear. Repeat with the other link. Frequently Asked Questions (1).What is a control arm and how does it work? A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body. (2).When to consider replacing a control arm? The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. (3).Do I need to replace the control arm if the bushings are worn? What is the safety risk? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (4).Is it safe to drive with a control arm problem? No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired. (5).Attentions The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension. Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint. All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced. (6).What is a sway bar and how does it work? A sway bar is a torsion spring — a piece of metal that resists twisting force. The sway bar is linked to each side of the suspension on a front or rear axle and designed to help the vehicle resist body roll, or sway, during turns or sudden emergency maneuvers. A sway bar does nothing unless the body of a vehicle leans to one side; if both wheels rise — as they would when the vehicle hits a bump — or fall at the same time, the sway bar doesn’t have to twist and has no effect. (7).When to consider replacing the sway bar? Excessive rust, corrosion, or cracking. Sway bars are typically manufactured from high-strength steel and have special coatings to resist corrosion. However, sway bars are known to crack, particularly at the ends or at welded joints. If the sway bar has visible cracks or excessive corrosion it should be replaced. Crash damage. Sway bars are near the ground on the vehicle suspension system. Road debris, driving over parking stops, and crashes can damage the sway bar or the sway bar links to the suspension. (8).What is the most important tip to offer to help with anti-sway bar installation? The most important thing is to ensure is that your wheels are not hanging. The suspension should be compressed so the control arms, etc. are at the same position they would be if the vehicle were sitting at ride height. This can be done by using ramps, a drive on lift, or simply loading the wheels if the vehicle is on jack stands or a two point lift. If this is not done the arc that the bar and suspension moves through due to the excessive travel can make things very difficult to line up. (9).Is it safe to drive with a sway bar problem? Yes. Should you suspect that a sway bar is broken, you can still drive the car with utmost caution. You will notice the car will lean and sway more when changing lanes. Your car will feel “looser” particularly when driving at high speeds. It is possible this will cause you to lose control of the car, resulting in a serious crash if you cannot overcome the loss of control that occurs with a defective sway bar. If you’re forced to drive with a broken sway bar, you need to drive slower than normal. Try to stick to surface streets and stay off highways and interstates where you might be required to change lanes. As long as you keep your speed down and don’t take turns too quickly, you should be safe driving until you can have it replaced at your earliest convenience. (10).Attentions Never reuse rubber components in sway bar replacement. The original equipment manufacturer’s sway bar will usually offer the best fit and function but they are expensive, and there are aftermarket sway bars of high quality for most vehicles. Whenever a suspension component like a sway bar is replaced, the entire vehicle suspension should be carefully inspected. Although the sway bar does not factor into the adjustment of vehicle alignment, it is always a good idea to check and confirm vehicle alignment after performing major repairs on your car’s suspension. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K620179, K620180, K80252 OE/OEM Part Number : Suspension Control Arms and Stabilizer Sway Bars Ends Linkages Superseded Part Number : Front Driver and Passenger Side Replacements Manufacturer Warranty : 10 Year Brand : VAP-autoparts Manufacturer Part Number : VAP80164201L Adjustable : Yes Modified Item : Yes Greasable or Sealed : Greasable Kit Parts Included : Sway Bar,Ball Joint,Control Arm OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 4Pcs Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS. (2).VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (5).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (6).VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).VAP-AUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 8 DG508 Ignition Coil Pack For Ford F150 Expedition 00 01 02 2003 2004 4.6/5.4L USD 28.99 6x Ignition Coils for Nissan Frontier Pathfinder Altima Maxima 3.5L 4.0L UF349 USD 46.69 For Chevrolet Silverado GMC Sierra 1500 4.8L 5.3L 2006-2000 Square Ignition Coil USD 67.99 4x Ignition Coil For 00-08 Toyota Corolla Celica Matrix 1.8L UF247 90919-02339 USD 34.99 Front Driver For 2010-2015 Chevrolet Chevy Cruze w/ Motor Power Window Regulator USD 39.49 Newly Listed For 2019-2022 Ford Ranger 5ft 60″ Short Bed Tri-Fold Tonneau Cover Soft Bed USD 133.00 LH+RH Side Pair Small Mirrors Plate w/Heated w/Signal For 2015-2018 VOLVO VNL USD 48.00 For 2007-2013 Toyota Tundra 5.5ft 66″ Short Bed Roll Up Tonneau Cover USD 110.96 A/F Ratio Sensor o2 02 Oxygen for 2005 Toyota Land Cruiser 4.7L Front &Rear X2 USD 37.46 For Land Rover Discovery 2005-2013 LR3 LR4 Aluminum Car Roof Rack Cross Bars USD 101.70 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us Fits 2007-2009 Saturn Aura Pair(4) Control Arm Sway Bar Link Suspension Part Applicable Models: 2004-2010 Chevrolet Malibu 2005-2009 Pontiac G6 2007-2009 Saturn Aura Features: Direct replacement for a trouble-free installation. Steel,iron or aluminum construction ensures durability. Powder-coated or painted for long-lasting rust and corrosion resistance. Package Includes: Lower Ball Joints come Pre-Assembled onto the Control Arms 1 x Part # Front Left Lower Control Arm w/ Ball Joint Driver Side 1 x Part # Front Right Lower Control Arm w/ Ball Joint Passenger Side 2 x Part # Front Sway Bar Link(11.8inch Length) Please check above compatibility list to make sure it fits your vehicle. Some of the parts we have grease fittings but other parts come factory sealed, this does not affect the performance or quality of the parts. Pictures may not contain the exact items that will be shipped, colors may be a little different, extra accessories & Parts may be added. Suspension Control Arm Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Control Arm Bushing Replacement Reference: Control arms themselves do not generally wear out, but the control arm bushings and ball joints do, so you will likely need to remove them to service those components. Yet, some OEMs or parts suppliers do not sell bushings and ball joints separately, so you may have to purchase the entire control arm and replace it as a unit. Also, control arms can become bent or damaged as the result of a collision or driving through a deep pothole, so control arms do need to be inspected for damage. Many control arms are now made from forged or sintered aluminum, so you may need to measure for damage or check it on an alignment machine. Picture(A) 1.Remove the coil spring and steering knuckle by following the steps in previous skill drills. 2.Loosen the bolts holding the upper control arm in place. Note that there might be shim packs held in by the bolts. If so, tape them together in their packs, and label their positions. Picture(B) 3.Remove the lower control arm by removing the bolts holding it in place. As you dismantle the system components, carry out a constant inspection of the parts being removed. Doing so will aid you when you need to order replacement parts. You should also mark mating parts with white paint to aid in reassembly. Picture(C) 4.Inspect the upper and lower control arm for wear or damage. If the control arm bushings show signs of excessive wear or deterioration of the bushing material, they will have to be replaced. 5.Replace the worn bushings in the upper and/or lower control arm. Replacement of control arm bushings can be performed two ways — with a hydraulic press with correctly sized press tools or with an air chisel. Be careful using an air chisel: Damage to the control arm can result, such as gouging the mounting surface of the bushing if you slip with the chisel. Picture(D) 6.Press method: Place the control arm in a hydraulic press supported so the bushing is level to the press head. Using the correct-sized adapter, press the bushing out. Picture(E) 7.Using the press, install the new bushing into the control arm. Be careful to start the bushing in straight, or you could bend the control arm. Press it in until the flange bottoms out. Picture(F) 8.Air chisel method: Install the control arm in a vise. Use an air chisel to work the bushing out. Be careful not to gouge the mating surface of the control arm. Picture(G) 9.Using the air hammer, drive the new bushing into place, making sure it is fully seated. Sway Bar The sway bar stabilizer bar is similar to the torsion bar or antiroll bar. It is used in light vehicles as a stabilizer, or antiroll bar, and connected to the chassis in the center, and each end is connected to one side of the suspension system. Sway bars are most common on the front suspension because it is most prone to sway, but are also installed on the rear suspension in some vehicles. When the vehicle is turning, centrifugal force acts on the body and tends to make it lean outward (roll). The sway bar uses its connections to each side of the suspension to resist this roll tendency. In this way, the spring on the inside corner can assist the spring on the outside corner to bear the additional load on the outside wheels. This tends to make the vehicle corner flatter. But because the sway bar can pivot in bushings on the frame, the sway bar just pivots when both wheels go over a speed bump. Also, stiffer roll bars can be installed in a vehicle to enhance its cornering ability. Sway Bar Stabilizer Link Removing Guideline: The sway bar stabilizer components help prevent body roll when cornering. Although the stabilizer bar itself rarely gives any trouble, the rubber bushings on the bar and links wear out. This usually results in increased body roll as well as a clunking noise in the suspension. The stabilizer components should be checked whenever a vehicle is brought into the shop because of handling concerns or suspension-related noises. Picture(A) 1.Safely raise the vehicle on a hoist, or use a jack and place safety stands under the frame. 2.Remove the nut holding the stabilizer bar link. Picture(B) 3.Remove the link by hand. Picture(C) 4.Visually inspect the rubber link grommets for cracks, softness, brittleness, or wear. Repeat with the other link. Frequently Asked Questions (1).What is a control arm and how does it work? A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body. (2).When to consider replacing a control arm? The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. (3).Do I need to replace the control arm if the bushings are worn? What is the safety risk? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (4).Is it safe to drive with a control arm problem? No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired. (5).Attentions The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension. Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint. All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced. (6).What is a sway bar and how does it work? A sway bar is a torsion spring — a piece of metal that resists twisting force. The sway bar is linked to each side of the suspension on a front or rear axle and designed to help the vehicle resist body roll, or sway, during turns or sudden emergency maneuvers. A sway bar does nothing unless the body of a vehicle leans to one side; if both wheels rise — as they would when the vehicle hits a bump — or fall at the same time, the sway bar doesn’t have to twist and has no effect. (7).When to consider replacing the sway bar? Excessive rust, corrosion, or cracking. Sway bars are typically manufactured from high-strength steel and have special coatings to resist corrosion. However, sway bars are known to crack, particularly at the ends or at welded joints. If the sway bar has visible cracks or excessive corrosion it should be replaced. Crash damage. Sway bars are near the ground on the vehicle suspension system. Road debris, driving over parking stops, and crashes can damage the sway bar or the sway bar links to the suspension. (8).What is the most important tip to offer to help with anti-sway bar installation? The most important thing is to ensure is that your wheels are not hanging. The suspension should be compressed so the control arms, etc. are at the same position they would be if the vehicle were sitting at ride height. This can be done by using ramps, a drive on lift, or simply loading the wheels if the vehicle is on jack stands or a two point lift. If this is not done the arc that the bar and suspension moves through due to the excessive travel can make things very difficult to line up. (9).Is it safe to drive with a sway bar problem? Yes. Should you suspect that a sway bar is broken, you can still drive the car with utmost caution. You will notice the car will lean and sway more when changing lanes. Your car will feel “looser” particularly when driving at high speeds. It is possible this will cause you to lose control of the car, resulting in a serious crash if you cannot overcome the loss of control that occurs with a defective sway bar. If you’re forced to drive with a broken sway bar, you need to drive slower than normal. Try to stick to surface streets and stay off highways and interstates where you might be required to change lanes. As long as you keep your speed down and don’t take turns too quickly, you should be safe driving until you can have it replaced at your earliest convenience. (10).Attentions Never reuse rubber components in sway bar replacement. The original equipment manufacturer’s sway bar will usually offer the best fit and function but they are expensive, and there are aftermarket sway bars of high quality for most vehicles. Whenever a suspension component like a sway bar is replaced, the entire vehicle suspension should be carefully inspected. Although the sway bar does not factor into the adjustment of vehicle alignment, it is always a good idea to check and confirm vehicle alignment after performing major repairs on your car’s suspension. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K620179, K620180, K80252 OE/OEM Part Number : Suspension Control Arms and Stabilizer Sway Bars Ends Linkages Superseded Part Number : Front Driver and Passenger Side Replacements Manufacturer Warranty : 10 Year Brand : VAP-autoparts Manufacturer Part Number : VAP80164201L Adjustable : Yes Modified Item : Yes Greasable or Sealed : Greasable Kit Parts Included : Sway Bar,Ball Joint,Control Arm OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Quantity : 4Pcs Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On ShippingWarrantyReturnDiscountSales Tax WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS. (2).VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (5).VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests. (6).VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).VAP-AUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of vap-autoparts. All rights reserved.
Frequently Asked Questions About Fits 2007-2009 Saturn Aura Pair(4) Control Arm Sway Bar Link Suspension Part in My Website
dietoma.com is the best online shopping platform where you can buy Fits 2007-2009 Saturn Aura Pair(4) Control Arm Sway Bar Link Suspension Part from renowned brand(s). dietoma.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling Fits 2007-2009 Saturn Aura Pair(4) Control Arm Sway Bar Link Suspension Part on dietoma.com?
dietoma.com helps you to shop online and delivers Vans to your doorstep. The best-selling Vans on dietoma.com are: Vans Era 500714 White Casual Shoes Sneakers women Size 7.5 Vans Authentic 44 DX ‘Anaheim Factory – Vanity Plate Black’ VN0A5KX4AXB Vans Off The Wall Unisex M4/W5.5 Sneakers Black Leather Perforated Slip-On Shoes Vans Southern Charm Men’s Shoe Pink Red Blue Checkered With Fruit Picnic Shoe Size 10 – VANS BAPE x Old Skool 36 ABC Camo New Vans Authentic Color Theory Iceberg Green Sneakers Low-Top Shoes 2024 Mens Vans Old Skool Blue White Stripe Sz 10 Vans Authentic 44 DX ‘Anaheim Factory’ VN0A38ENMR2 Men’s Shoes Vans SK8-Hi Core Classic vans shoes men Size 7 (women 8.5) And One Women Size 8.5 Vans Skate Shoes Women’s 6.5 Men’s 5, I Love My Vans Low Lace Sneakers 721356 Vans Mens White Knit Casual And Fashion Sneakers Shoes 6 Medium (D) BHFO 1053 Vans Project Cat 7.5 (Mens) Low Top In Great Condition Vans Authentic 44 DX ‘Positivity Patchwork Blanc de Blanc’ VN0A54F98FK Vans Old Skool (Otw Rally) Men’s Size 5 Checkered Multi-Color VN0A4BV5V3L VANS OFF THE WALL Classic World Flags Slip Ons Men 6.5 Women 8 Vans 721454 Maroon Skate Shoes Men’s 5.5 Women’s 7 Off The Wall EUC!! VANS Old Skool Yacht Club Green/Blue Shoes 2018 Men’s 5 Womens 6.5 Size 10 – VANS Sk8-Hi Denim 721356 Black Vans Men Size 12 – VANS Skate Chukka Low Chocolate Gum Vans Off The Wall Shoes Lace Up Mens Size US 5.5 & Womens US 7 Metalic Gray Low VANS OFF THE WALL 721356 Black White Sneakers Mens Size US 7 EUR 39 Vans Authentic Grey, White, & Gum Skate Shoes – Men’s Size 4.5 / Women’s Size 6 VANS Low Top Lace Up Shoes Gray Black Canvas Mens Size 12 TB4R Vans Sk8-Hi Skate Shoes black/white Men 3.5 Women 5.0 Men’s Vans Classic Old Skool OTW Rally SZ 5 Checker Deep Green VN0A4BV5VZN Vans light Purple Size 7 Vans Old Skool 36 DX ‘Black White’ VN0A4BW3KS7 Size 7.5 – VANS Sk8-Hi Multi-Color Vans Skate Era Skate Shoes Suede Sneakers Fatigue VN0A5FC9FTI US 4-13 Vans MTE Harbor Mule VR3 ‘Black’ – VN000CW3BLK Expeditedship Van Off The Wall Men Sz 7 Womens Sz 8 Shoes Vans Mens Sz 7 Ferris VN-098NYV5 Black Gray Lace Up Low Top Sneaker Shoes VANS Old Sokol Missy Size 5 Pink Checkerboard Slip ons. 2024 TOPPS ALLEN & GINTER SILVER PORTRAIT PARALLEL YOU PICK FROM LIST 1-300 Size 7.5 – VANS Sk8-Hi x Shark Week Black Blue VANS Old Skool Sneakers Mens 7 Black Suede White Skater Y2K Classic Vans Unisex Old Skool Lace Up Sneakers in White USM8/USW9.5 Vans Size 6 Mens Womens 7.5 Brand New W/o Tags No Box Vans OTW Old Skool Reissue 36 Pearlized – Size 8 – Black – NEW Vans Men/Women’s Shoes “Old Skool Pro” (Shake Junt) Black/White VANS Slip Ons Black, Men’s 4.5 And Women’s Size 6 VANS Era DISARRAY Stripes Checks Circle Shoes “OFF THE WALL” Men’s And Women’s vans off the wall 721565 shoes multicolor mens 5/ womens 6.5 Vans Red Suede Toe & Heel W/ Flames & Checkered, US Size 7 Junior Vans Beetles All You Need is Love Mens Sneakers Sz 10 VANS CLOTTEE x Authentic Pixelated Universe – Marshmallow – VN000EE3BPH Vans Sk8-Hi Led Zeppelin (US Men’s 9), NIB Vans Womens’ Floral Button Up in Excellent Condition. Skater Wear Vans Vans Unisex Off The Wall Suede Sneakers Multicolor Big Kids/Juniors Size US 5 Vans Chukka Low (Oxford) Cornstalk/Gum Shoes – Size US Men’s 8.0 Vans Sk8-Hi Men’s Unisex Skate Shoes Size 6.5 Black And White Vans LOW Top BLACK SZ 6.5 Vans Authentic suede Canvas No Show Tongue Skate Shoes Women 6 Mens 4.5 tb9c VANS Shoes Beige Textured Women Size 6 / Men Size 4.5 Vans Men’s Off The Wall Shoes Black w/White Trim Lace Up Low Top Size 7.5 Vans all black sneaker men’s 7.5 Vans Classic Slip‑On ‘Classic Tumble’ – VN0A38F7PXP 15 Vans Old Skool Black Suede/Canvas Skate Sneakers Men 5.5 -Women 7 Vans Men’s Old Skool Skate Shoes DM9 Tie Dye Multicolor Size 9 Bin78 Vans Unisex Off The Wall Suede Sneakers Multicolor Big Kids/Juniors Size US 7 Vans Mens Off The Wall 508357 Black Casual Shoes Sneakers Mens Size 6.5 Vans Skate Grosso Mid – Dress Blue/Drizzle Vans Sk8 Hi Winter Sneakers Size 7 – VANS Old Skool Black White Vans Fat Lace Authentic Low Pro Skate Sneakers Shoes Yarrow VN000D04YGD US 4-13 Size 5 Mens – VANS Sk8-Mid Reissue Denim 2-Tone Vans Sk8 Hi Red Men’s US Size 7 Preowned Vans Classic Slip On Baby Boys Shoes Size 6, Color: Pride Vans Filmore Suede/Canvas Port Royal Red Mens Suede Sneaker VN0A3MTJU1A1 VANS Old Skool canvas skate shoes sneakers size 9 men’s Vans Off the Wall Heather Grey Sneakers, Men’s Size 6.5 VANS Unisex Gray Skater Sneakers Mens 10.5 Womens 12 (UK 9.5, EU 44.0) **CLEAN** Vans item #721454 | Size US MEN 4 US WOMEN 5.5 | Color Red White Black Pre-owned Mens Vans Old Skool Skater Shoes Size 6.5M 8.0W Off the Wall Vans Checkerboard Authentic Size 9 Men Golden Nugget/True White Vans Old Skool Size5 Vans Size 6 US Mens 7.5 US Womens Skateboard Sneakers Colorblock Vans Off The Wall Mens Sz 5.5/Wms Sz 7 Shoes Vans Shoes Mens Size 7 Black Checkerd VANS Skateboarding Sneakers Men 9 OG Style 138 LX Suede Canvas Blue Mirage Shoes Vans Unisex Off The Wall 507698 Black Casual Shoes Sneakers Size M 6.5 W 8 Vans SK8-HI Sherpa Drizzl Blc de Blc Grey White Faux Fur Fluffy Sneakers M 5.5, Vans Off the Wall Red Lace Up Low Top Classic Men 5 Women 6.5 Sneakers TB4R Vans Old Skool Unisex Style : Vn0a4u3b Size 9.5 – VANS Sk8- Mono Canvas High Peach Blush VANS Authentic x SpongeBob SquarePants Aye Aye Captain! 2021 – VN0A5HZSZAS Vans Canvas Pop Authentic Skate Sneakers Shoes White/Green VN0A2Z3ZWGR US 4-13 VANS Old Skool Low Red Checkerboard Sneakers Suede Canvas Unisex M 7.5 W 9 VN0A38G1R1Q Mens 4.5–Women’s 6.0 Vans UA OLD SKOOL ‘YATCH CLUB’ Suede Vans Men’s Sneaker Sz 6.5 Low Top Lace up Black on Black 721565 VN0A4BVFBLK1 MASTERMIND WORLD × Vault by Vans Old Skool VLT LX VANS CB SUN GRAY/BLUE SHOES SIZE 8 MEN’S EUC Vans Wild Cactus Shoes Men’s 6.5 Women’s 8 New Vans off the wall shoes Pride size 11.5 A-0001 Vans SK8 Hi Bolt Mens 6.5, 8.0 Women Shoes Black Chrome Flash Casual Sneakers Vans Unisex Classic 500714 Black Casual Shoes Sneakers Size M 6.5 W 8 Vans Slip-On ‘Breast Cancer Awareness’ VN0A4BV3TB3 Mens Pullover Fleece Hoodie