$75.46 Buy It Now or Best Offer
free,30-Day Returns
Seller Store
() %,
Location: Ontario, California, United States
Ships to: US,
Item: 264542334561
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Placement on Vehicle:Front, Left, Right, Lower
Type:Control Arm & Ball Joint Assembly
Universal Fitment:No
Control Arm Construction:Forged
Items Included:Mounting Hardware
Custom Bundle:Yes
Interchange Part Number:K620041
OE/OEM Part Number:Suspension Control Arms and Ball Joints Assembly
Superseded Part Number:Front Driver and Passenger Side Replacement
Manufacturer Warranty:10 Year
topcn-autoparts:topcn-autoparts
UPC:Does not apply
Manufacturer Part Number:TA81008602P
Adjustable:Yes
Modified Item:Yes
Kit Parts Included:Control Arm, Ball Joint
Kit or Single Part:Kit
Greasable or Sealed:Greasable
OE Spec or Performance/Custom:OE Spec
Surface Finish:Polished, Rust Protected
Suspension Grade:Standard
Quantity:2 Pcs
Cross Reference Part Number:2004 2005 2006 2007 2008 2009
Fitment:For Mazda 3
Features:Greasable
Finish:Coated
Cotter Pin Hole:Yes
Material:Alloy Steel
Mounting Style:Bolt-On
eBay 1.Fit For 2007-2009 Mazda 3 (Excluding Speed Model) 2004-2006 Mazda 3 2006-2014 Mazda 5 2.Package Includes: Lower Ball Joints come Pre-Assembled onto the Lower Control Arms 1x Part# Front Left Lower Control Arm w/ Ball Joint and Bushing – K620040 1x Part# Front Right Lower Control Arm w/ Ball Joint and Bushing – K620041 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-09 Mazda 3 1.Fit For 2007-2009 Mazda 3 (Excluding Speed Model) 2004-2006 Mazda 3 2006-2014 Mazda 5 2.Package Includes: Lower Ball Joints come Pre-Assembled onto the Lower Control Arms 1x Part# Front Left Lower Control Arm w/ Ball Joint and Bushing – K620040 1x Part# Front Right Lower Control Arm w/ Ball Joint and Bushing – K620041 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Suspension Control Arm The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: (1).Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. (2).Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. (3).Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. (4).Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. Suspension Control Arm Replacement Guideline: Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Picture(A) A defective control arm can manifest in the following ways: (1).Noise (squeaking, creaking, rumbling). (2).Deteriorating driveability. (3).Increasingly woolly and imprecise steering. (4).Uneven tyre wear. Tip:If the control arm is in working order, it is possible to only replace the defective bearings and joints. However, replacing bearings, control arm bushings and ball joints can be very complex and costly. Picture(B) 1.First lift the vehicle using a car lift, ideally a wheel-free four-post car lift. This makes it easier to correctly tighten the control arm fixing screws. WARNING:Depending on the axle design, the control arm may need to be secured against falling with a suitable device, e.g. a transmission lifter. 2.Treat the fixing screws and nuts of the control arm with rust solvent and leave it to work for a few minutes so that they are easier to loosen. 3.On vehicles with automatic headlight levelling, it may be necessary to detach the leveling sensor from the control arm. Picture(C) 4.If the stabilizer is connected to the control arm, the next step is to loosen and remove the corresponding stabiliser fixing screws. 5.Loosen and remove the control arm fixing screws. 6.Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). 7.Remove the old control arm. Picture(D) 8.Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner. Otherwise single rust particles can enter the new control arm joint via the ball pin, potentially leading to premature failure of the joint. Picture(E) 9.Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Picture(F) 10.Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. NOTE:Do not tighten the fixing screws and nuts in this step, otherwise the rubber mounts will twist when the suspension compresses. This would lead to undesired preloading on the mounts. Picture(G) 11.Now lower the vehicle until the suspension is compressed. Depending on vehicle type, load or unload the vehicle until the required height published in the specific installation instruction is reached. This is where a wheel-free four-post car lift is advantageous, as the underside of the vehicle can still be easily accessed once lowered. 12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. 13.Lower the vehicle all the way. 14.Measure the chassis and adjust if necessary. 15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. 16.To conclude, test-drive the vehicle. Frequently Asked Questions (1).What’s the function of control arm? The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward. (2).What is the significance of the control arm for the car? As an important part of the car suspension, the control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses. It is an important safety part of the chassis system. Therefore, it requires high strength and reliability in the design. Its fatigue strength is directly related to the safety of vehicles and members. (3).How to tell the quality of control arm? Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance. Look at chassis protection and workmanship: Regarding chassis protection, we mainly pay attention to whether it is equipped with engine under guard, whether there is coating or cover at the bottom of the car body, whether the oil pipe is covered with a guard plate, whether the front and rear wheel arches are protected. Board or coating coverage, etc. (4).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (5).What is the average cost of replacing control arms? The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hours. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K620041 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA81008602P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm, Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Suspension Grade : Standard Quantity : 2 Pcs Cross Reference Part Number : 2004 2005 2006 2007 2008 2009 Fitment : For Mazda 3 Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On Discount Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. Shipping WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. Return (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Best Sales 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 17.69 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 19.49 2x Rear Trunk Hatch Liftgate Lift Supports Springs Struts For Scion tC 2005-2010 USD 15.86 Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 24.98 Throttle Body for Dodge Avenger Journey Caliber Jeep Patriot Compass 2.4L 2.0L USD 46.99 Newly Listed Running Boards Fits 19-24 Chevy Silverado GMC Sierra 1500 Side Steps Nerf Bars USD 154.77 Running Boards Fits 2019-2024 Dodge Ram 1500 Quad Cab Side Steps Steel Nerf Bars USD 154.77 Running Boards Fits 2009-2018 Dodge Ram 1500 Quad Cab Side Steps Nerf Bars BLK USD 154.77 Running Boards Fits 2009-2018 Dodge Ram 1500 Quad Cab Side Steps Steel Nerf Bars USD 154.77 Running Boards Fits 2019-2024 Dodge Ram 1500 Quad Cab Side Steps Nerf Bars BLK USD 154.77 Terms & Contact Shipping Policy Payment Policy Return Policy FAQ About Us 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-09 Mazda 3 1.Fit For 2007-2009 Mazda 3 (Excluding Speed Model) 2004-2006 Mazda 3 2006-2014 Mazda 5 2.Package Includes: Lower Ball Joints come Pre-Assembled onto the Lower Control Arms 1x Part# Front Left Lower Control Arm w/ Ball Joint and Bushing – K620040 1x Part# Front Right Lower Control Arm w/ Ball Joint and Bushing – K620041 Notes (1).Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile. (2).Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests. (3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page. If you are interested with any other suspension parts, please click and save our store. Suspension Control Arm The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice: (1).Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced. (2).Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm. (3).Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road. (4).Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers. Suspension Control Arm Replacement Guideline: Control arms are installed in pairs on the front and rear axle and connect the chassis to the wheels as part of the suspension. Therefore, they have a significant influence on the driving characteristics of the vehicle. A dynamic or a comfortable driving style? The control arms are individually adjusted to the vehicle depending on the desired characteristics. They also absorb lateral movements and forces resulting from driving off and braking. Picture(A) A defective control arm can manifest in the following ways: (1).Noise (squeaking, creaking, rumbling). (2).Deteriorating driveability. (3).Increasingly woolly and imprecise steering. (4).Uneven tyre wear. Tip:If the control arm is in working order, it is possible to only replace the defective bearings and joints. However, replacing bearings, control arm bushings and ball joints can be very complex and costly. Picture(B) 1.First lift the vehicle using a car lift, ideally a wheel-free four-post car lift. This makes it easier to correctly tighten the control arm fixing screws. WARNING:Depending on the axle design, the control arm may need to be secured against falling with a suitable device, e.g. a transmission lifter. 2.Treat the fixing screws and nuts of the control arm with rust solvent and leave it to work for a few minutes so that they are easier to loosen. 3.On vehicles with automatic headlight levelling, it may be necessary to detach the leveling sensor from the control arm. Picture(C) 4.If the stabilizer is connected to the control arm, the next step is to loosen and remove the corresponding stabiliser fixing screws. 5.Loosen and remove the control arm fixing screws. 6.Loosen the ball joint at the steering knuckle with a suitable special tool (e.g. a puller). 7.Remove the old control arm. Picture(D) 8.Clean the mounting flange of the ball joint pin on the steering knuckle with sandpaper and then with brake cleaner. Otherwise single rust particles can enter the new control arm joint via the ball pin, potentially leading to premature failure of the joint. Picture(E) 9.Fit the new control arm with the supplied accessories and attach new fixing screws and nuts. Picture(F) 10.Reattach the stabilizer and, if applicable, the leveling sensor for headlight leveling to the control arm. NOTE:Do not tighten the fixing screws and nuts in this step, otherwise the rubber mounts will twist when the suspension compresses. This would lead to undesired preloading on the mounts. Picture(G) 11.Now lower the vehicle until the suspension is compressed. Depending on vehicle type, load or unload the vehicle until the required height published in the specific installation instruction is reached. This is where a wheel-free four-post car lift is advantageous, as the underside of the vehicle can still be easily accessed once lowered. 12.Tighten the fixing screws with the torque stipulated by the vehicle manufacturer. 13.Lower the vehicle all the way. 14.Measure the chassis and adjust if necessary. 15.Check and, if necessary, adjust the headlight settings on vehicles with automatic headlight leveling where the leveling sensor is attached to the control arm. 16.To conclude, test-drive the vehicle. Frequently Asked Questions (1).What’s the function of control arm? The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward. (2).What is the significance of the control arm for the car? As an important part of the car suspension, the control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses. It is an important safety part of the chassis system. Therefore, it requires high strength and reliability in the design. Its fatigue strength is directly related to the safety of vehicles and members. (3).How to tell the quality of control arm? Look at the materials and processing of the control arm: the materials used to control the arm, common are steel and aluminum alloy. In ordinary family cars, steel control arms are very common, and the basic appeal is to meet the strength while controlling costs. In the middle and high-end models, you will see the control arm of the aluminum alloy and the wheel bearing housing. In addition to meeting the strength of the suspension, this material can further reduce the weight and reduce the weight of the suspension spring to improve the suspension response. Improve driving performance. Look at chassis protection and workmanship: Regarding chassis protection, we mainly pay attention to whether it is equipped with engine under guard, whether there is coating or cover at the bottom of the car body, whether the oil pipe is covered with a guard plate, whether the front and rear wheel arches are protected. Board or coating coverage, etc. (4).Do I need to replace the control arm if the bushings are worn? Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm. (5).What is the average cost of replacing control arms? The cost to replace control arms depend on the vehicle. Control arms cost different amounts depending on the vehicle, as well as the labor to install. Some are easy to install and take little time, while others can take several hours. Item Specifics Placement on Vehicle : Front Type : Control Arm & Ball Joint Assembly Universal Fitment : No Control Arm Construction : Forged Items Included : Mounting Hardware Custom Bundle : Yes Interchange Part Number : K620041 OE/OEM Part Number : Suspension Control Arms and Ball Joints Assembly Superseded Part Number : Front Driver and Passenger Side Replacement Manufacturer Warranty : 10 Year Brand : topcn-autoparts Manufacturer Part Number : TA81008602P Adjustable : Yes Modified Item : Yes Kit Parts Included : Control Arm, Ball Joint Kit or Single Part : Kit Greasable or Sealed : Greasable OE Spec or Performance/Custom : OE Spec Surface Finish : Polished, Rust Protected Suspension Grade : Standard Quantity : 2 Pcs Cross Reference Part Number : 2004 2005 2006 2007 2008 2009 Fitment : For Mazda 3 Features : Greasable Finish : Coated Cotter Pin Hole : Yes Material : Alloy Steel Mounting Style : Bolt-On DiscountShippingWarrantyReturnFeedback Targeted Discounts Terms (1).Targeted Discount Terms only apply to auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items. (3).Targeted Discount will be refunded from buyer’s payment, which means Topcn-autoparts won’t provide any extra targeted discounts if full refund is issued. Targeted Shipping Discount (4).Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV). If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items. Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Topcn-autoparts has the final power of interpretation of all the above Targeted Discount Terms and Procedures. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. (1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available. (2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. (3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available. (4).Global Shipping Program is temporarily not available due to the reason for package dimensions. (5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received. (6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received. (7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Items valued over $15 on eBay that include a warranty or service contract must contain additional details in seller’s listing description. 10 Year Warranty Terms and Procedures (1).The warranty terms only apply to the auto parts purchased from Topcn-autoparts, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link. (2).Topcn-autoparts carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements. (3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period. (4).Topcn-autoparts promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise Topcn-autoparts has the right to refuse any replacement requests. (5).Topcn-autoparts promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise Topcn-autoparts has the right to refuse any replacement requests. (6).Topcn-autoparts carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly. (7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately. (8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price. (9).Topcn-autoparts has the final power of interpretation of the above 10 Year Warranty Terms and Procedures. (1).Most of items support 60 Days Money Back Guarantee. (2).Refunds will be credited within 2 or 3 business days after returned item(s) is received. Copyright of Topcn-autoparts. All rights reserved.
Frequently Asked Questions About 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-06 Mazda 3 in My Website
dietoma.com is the best online shopping platform where you can buy 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-06 Mazda 3 from renowned brand(s). dietoma.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling 2x Front Lower Control Arm Ball Joint Set Fits 2006-15 Mazda 5 2004-06 Mazda 3 on dietoma.com?
dietoma.com helps you to shop online and delivers Vans to your doorstep. The best-selling Vans on dietoma.com are: Vans Era 500714 White Casual Shoes Sneakers women Size 7.5 Vans Authentic 44 DX ‘Anaheim Factory – Vanity Plate Black’ VN0A5KX4AXB Vans Off The Wall Unisex M4/W5.5 Sneakers Black Leather Perforated Slip-On Shoes Vans Southern Charm Men’s Shoe Pink Red Blue Checkered With Fruit Picnic Shoe Size 10 – VANS BAPE x Old Skool 36 ABC Camo New Vans Authentic Color Theory Iceberg Green Sneakers Low-Top Shoes 2024 Mens Vans Old Skool Blue White Stripe Sz 10 Vans Authentic 44 DX ‘Anaheim Factory’ VN0A38ENMR2 Men’s Shoes Vans SK8-Hi Core Classic vans shoes men Size 7 (women 8.5) And One Women Size 8.5 Vans Skate Shoes Women’s 6.5 Men’s 5, I Love My Vans Low Lace Sneakers 721356 Vans Mens White Knit Casual And Fashion Sneakers Shoes 6 Medium (D) BHFO 1053 Vans Project Cat 7.5 (Mens) Low Top In Great Condition Vans Authentic 44 DX ‘Positivity Patchwork Blanc de Blanc’ VN0A54F98FK Vans Old Skool (Otw Rally) Men’s Size 5 Checkered Multi-Color VN0A4BV5V3L VANS OFF THE WALL Classic World Flags Slip Ons Men 6.5 Women 8 Vans 721454 Maroon Skate Shoes Men’s 5.5 Women’s 7 Off The Wall EUC!! VANS Old Skool Yacht Club Green/Blue Shoes 2018 Men’s 5 Womens 6.5 Size 10 – VANS Sk8-Hi Denim 721356 Black Vans Men Size 12 – VANS Skate Chukka Low Chocolate Gum Vans Off The Wall Shoes Lace Up Mens Size US 5.5 & Womens US 7 Metalic Gray Low VANS OFF THE WALL 721356 Black White Sneakers Mens Size US 7 EUR 39 Vans Authentic Grey, White, & Gum Skate Shoes – Men’s Size 4.5 / Women’s Size 6 VANS Low Top Lace Up Shoes Gray Black Canvas Mens Size 12 TB4R Vans Sk8-Hi Skate Shoes black/white Men 3.5 Women 5.0 Men’s Vans Classic Old Skool OTW Rally SZ 5 Checker Deep Green VN0A4BV5VZN Vans light Purple Size 7 Vans Old Skool 36 DX ‘Black White’ VN0A4BW3KS7 Size 7.5 – VANS Sk8-Hi Multi-Color Vans Skate Era Skate Shoes Suede Sneakers Fatigue VN0A5FC9FTI US 4-13 Vans MTE Harbor Mule VR3 ‘Black’ – VN000CW3BLK Expeditedship Van Off The Wall Men Sz 7 Womens Sz 8 Shoes Vans Mens Sz 7 Ferris VN-098NYV5 Black Gray Lace Up Low Top Sneaker Shoes VANS Old Sokol Missy Size 5 Pink Checkerboard Slip ons. 2024 TOPPS ALLEN & GINTER SILVER PORTRAIT PARALLEL YOU PICK FROM LIST 1-300 Size 7.5 – VANS Sk8-Hi x Shark Week Black Blue VANS Old Skool Sneakers Mens 7 Black Suede White Skater Y2K Classic Vans Unisex Old Skool Lace Up Sneakers in White USM8/USW9.5 Vans Size 6 Mens Womens 7.5 Brand New W/o Tags No Box Vans OTW Old Skool Reissue 36 Pearlized – Size 8 – Black – NEW Vans Men/Women’s Shoes “Old Skool Pro” (Shake Junt) Black/White VANS Slip Ons Black, Men’s 4.5 And Women’s Size 6 VANS Era DISARRAY Stripes Checks Circle Shoes “OFF THE WALL” Men’s And Women’s vans off the wall 721565 shoes multicolor mens 5/ womens 6.5 Vans Red Suede Toe & Heel W/ Flames & Checkered, US Size 7 Junior Vans Beetles All You Need is Love Mens Sneakers Sz 10 VANS CLOTTEE x Authentic Pixelated Universe – Marshmallow – VN000EE3BPH Vans Sk8-Hi Led Zeppelin (US Men’s 9), NIB Vans Womens’ Floral Button Up in Excellent Condition. Skater Wear Vans Vans Unisex Off The Wall Suede Sneakers Multicolor Big Kids/Juniors Size US 5 Vans Chukka Low (Oxford) Cornstalk/Gum Shoes – Size US Men’s 8.0 Vans Sk8-Hi Men’s Unisex Skate Shoes Size 6.5 Black And White Vans LOW Top BLACK SZ 6.5 Vans Authentic suede Canvas No Show Tongue Skate Shoes Women 6 Mens 4.5 tb9c VANS Shoes Beige Textured Women Size 6 / Men Size 4.5 Vans Men’s Off The Wall Shoes Black w/White Trim Lace Up Low Top Size 7.5 Vans all black sneaker men’s 7.5 Vans Classic Slip‑On ‘Classic Tumble’ – VN0A38F7PXP 15 Vans Old Skool Black Suede/Canvas Skate Sneakers Men 5.5 -Women 7 Vans Men’s Old Skool Skate Shoes DM9 Tie Dye Multicolor Size 9 Bin78 Vans Unisex Off The Wall Suede Sneakers Multicolor Big Kids/Juniors Size US 7 Vans Mens Off The Wall 508357 Black Casual Shoes Sneakers Mens Size 6.5 Vans Skate Grosso Mid – Dress Blue/Drizzle Vans Sk8 Hi Winter Sneakers Size 7 – VANS Old Skool Black White Vans Fat Lace Authentic Low Pro Skate Sneakers Shoes Yarrow VN000D04YGD US 4-13 Size 5 Mens – VANS Sk8-Mid Reissue Denim 2-Tone Vans Sk8 Hi Red Men’s US Size 7 Preowned Vans Classic Slip On Baby Boys Shoes Size 6, Color: Pride Vans Filmore Suede/Canvas Port Royal Red Mens Suede Sneaker VN0A3MTJU1A1 VANS Old Skool canvas skate shoes sneakers size 9 men’s Vans Off the Wall Heather Grey Sneakers, Men’s Size 6.5 VANS Unisex Gray Skater Sneakers Mens 10.5 Womens 12 (UK 9.5, EU 44.0) **CLEAN** Vans item #721454 | Size US MEN 4 US WOMEN 5.5 | Color Red White Black Pre-owned Mens Vans Old Skool Skater Shoes Size 6.5M 8.0W Off the Wall Vans Checkerboard Authentic Size 9 Men Golden Nugget/True White Vans Old Skool Size5 Vans Size 6 US Mens 7.5 US Womens Skateboard Sneakers Colorblock Vans Off The Wall Mens Sz 5.5/Wms Sz 7 Shoes Vans Shoes Mens Size 7 Black Checkerd VANS Skateboarding Sneakers Men 9 OG Style 138 LX Suede Canvas Blue Mirage Shoes Vans Unisex Off The Wall 507698 Black Casual Shoes Sneakers Size M 6.5 W 8 Vans SK8-HI Sherpa Drizzl Blc de Blc Grey White Faux Fur Fluffy Sneakers M 5.5, Vans Off the Wall Red Lace Up Low Top Classic Men 5 Women 6.5 Sneakers TB4R Vans Old Skool Unisex Style : Vn0a4u3b Size 9.5 – VANS Sk8- Mono Canvas High Peach Blush VANS Authentic x SpongeBob SquarePants Aye Aye Captain! 2021 – VN0A5HZSZAS Vans Canvas Pop Authentic Skate Sneakers Shoes White/Green VN0A2Z3ZWGR US 4-13 VANS Old Skool Low Red Checkerboard Sneakers Suede Canvas Unisex M 7.5 W 9 VN0A38G1R1Q Mens 4.5–Women’s 6.0 Vans UA OLD SKOOL ‘YATCH CLUB’ Suede Vans Men’s Sneaker Sz 6.5 Low Top Lace up Black on Black 721565 VN0A4BVFBLK1 MASTERMIND WORLD × Vault by Vans Old Skool VLT LX VANS CB SUN GRAY/BLUE SHOES SIZE 8 MEN’S EUC Vans Wild Cactus Shoes Men’s 6.5 Women’s 8 New Vans off the wall shoes Pride size 11.5 A-0001 Vans SK8 Hi Bolt Mens 6.5, 8.0 Women Shoes Black Chrome Flash Casual Sneakers Vans Unisex Classic 500714 Black Casual Shoes Sneakers Size M 6.5 W 8 Vans Slip-On ‘Breast Cancer Awareness’ VN0A4BV3TB3 Mens Pullover Fleece Hoodie